X-Pins
Flange alignment pins help to manually align each flange. For even alignment it is best to use in sets of two. The pins are measured by the BOLT HOLE SIZE, not the BOLT SIZE.
TorsionX X-Pins:
- For aligning flanges
- Perfect for limited space
- Insert through the flanges and turn with an open-end/ring wrench
- Fast way of working, don't waste time
| Model | Hexagon size (A) | Shaft size in mm (B) | Shaft length in mm (C) | Overall length in mm (D) |
|---|---|---|---|---|
| FAP008 | 1/2″ | 12.4 | 60.5 | 79.5 |
| FAP008L | 1/2″ | 12.4 | 136.7 | 155.7 |
| FAP010 | 5/8″ | 15.5 | 69.9 | 88.9 |
| FAP010L | 5/8″ | 15.5 | 146.1 | 165.1 |
| FAP012 | 3/4″ | 18.8 | 82.6 | 108.0 |
| FAP012L | 3/4″ | 18.8 | 158.8 | 184.2 |
| FAP014 | 7/8″ | 21.8 | 88.9 | 114.3 |
| FAP014L | 7/8″ | 21.8 | 165.1 | 190.5 |
| FAP100 | 1″ | 24.9 | 101.6 | 133.4 |
| FAP100L | 1″ | 24.9 | 177.8 | 209.6 |
| FAP102 | 1 1/8″ | 27.9 | 127.0 | 158.8 |
| FAP102L | 1 1/8″ | 27.9 | 203.2 | 235.0 |
| FAP104 | 1 1/4″ | 31.2 | 139.7 | 177.8 |
| FAP104L | 1 1/4″ | 31.2 | 215.9 | 254.0 |
| FAP106 | 1 3/8″ | 34.3 | 158.8 | 196.9 |
| FAP106L | 1 3/8″ | 34.3 | 235.0 | 273.1 |
| FAP108 | 1 1/2″ | 37.3 | 165.1 | 209.6 |
| FAP108L | 1 1/2″ | 37.3 | 241.3 | 285.8 |
| FAP110 | 1 5/8″ | 40.4 | 184.2 | 228.6 |
| FAP110L | 1 5/8″ | 40.4 | 260.4 | 304.8 |
| FAP112 | 1 3/4″ | 43.7 | 200.2 | 251.0 |
| FAP112L | 1 3/4″ | 43.7 | 276.4 | 327.2 |
| FAP114 | 1 7/8″ | 46.7 | 212.9 | 263.7 |
| FAP114L | 1 7/8″ | 46.7 | 289.1 | 339.9 |
| FAP200 | 2″ | 49.8 | 228.6 | 279.4 |
| FAP200L | 2″ | 49.8 | 304.8 | 355.6 |
| FAP202 | 2 1/8″ | 52.9 | 304.8 | 355.6 |
| FAP202L | 2 1/8″ | 52.9 | 381.0 | 431.8 |
| FAP206 | 2 3/8″ | 59.2 | 336.6 | 387.4 |
| FAP206L | 2 3/8″ | 59.2 | 412.8 | 463.6 |
| FAP210 | 2 5/8″ | 65.3 | 355.6 | 406.4 |
| FAP210L | 2 5/8″ | 65.3 | 431.8 | 482.6 |
| FAP214 | 2 7/8″ | 71.6 | 371.6 | 422.4 |
| FAP302 | 3 1/8″ | 77.7 | 457.2 | 520.7 |
| FAP310 | 3 5/8″ | 90.2 | 508 | 571.5 |
English 
Dutch